|
General Information:
- Minimum qualifying load is 1 kW.
- Applies only to permanent heating installations (no plug-in heaters)
- Credit must be requested within 180 days of installation.
- An Inspection & Qualification Report signed by the consumer and general manager is required.
- An account number and social security or taxpayer ID number must be included.
- Resistance heat credit applies only to new installations.
- Heat Pump and ETS credits apply to new and replacement installations.
- Credits are available to all end-use customer classes.
- Energy audit must be attached.
Minimum Efficiency Insulation Standards:
- Efficiency (insulation standards set at the sum of ‘R’ values for ceiling plus walls
- Existing Building – R30; New Building – R49
- Efficiency standards are applicable to all heating types: resistive, heat pumps and ETS.
- Required insulation shall be verified by SECPA visual inspection and noted on the Inspection and Qualification Report.
| Efficiency Standards for Heat Pumps: |
ARI Code |
EER |
COP |
SEER |
HSPF |
| Central - Air Source |
HP |
|
|
10.0 |
6.8 |
| Central - Ground Water Source |
GWHP |
11.0 |
2.8 |
|
|
| Central - Ground Source Closed-Loop |
GSHP |
11.0 |
2.8 |
|
|
| Central - Water Source |
WSHP |
9.3 |
3.8 |
|
|
| Terminal Unit - Air Source |
PTHP |
8.1 |
2.6 |
|
|
For information regarding Electric Heat - Energy Efficiency Credits, please contact Southeast Colorado Power or email memberservices@secpa.com |
